Assembly Guides

Yes. Standard 15.25in/390 mm depth is sized for 12in. LPs with room to pull a record without fighting the shelf. Start around 500 records and build to 2,500 and beyond as the collection grows. Bookends keep rows tidy; open bays between the dowels fit amp and receiver without enclosing your gear in a cabinet.

About 80 LPs per bay if you like room to flip through them. Up to 100 when the bay is full. Message us with your collection size and wall width and we will configure bays to match.

Yes. Almost all turntables fit on top between the caps. If not, we can do a flush top with no caps. A full KittaParts wall is a solid bit of timber, but we are making shelving, not audiophile isolation gear.

Send us your deck dimensions if you want the top bay planned around a specific model.

A full bay of records can be heavy. At around 100 LPs per bay, you are looking at roughly 46.3lbs/21 kg per bay. An Extra Large shelf spans four bays, so up to 400 records on one shelf level is around 185.2lbs/84 kg. We have built walls with 28 bays or more, well over half a tonne of records when full, and have not seen the shelves sag or warp over time.

It comes down to wall mounting: bracket count and how you have fixed them to the wall matter on tall, heavy walls. Message us with your collection size and wall height and we will advise.

Yes. KittaParts is modular and threaded, so you can add modules, reconfigure shelves, and grow the system as your room or needs change. We design for backwards compatibility wherever we can.

If you are planning an expansion, we usually recommend building what you already have in the KittaParts Builder, then adding whatever new components you need. Remove the parts you know you already own from the configuration before checkout, and that leaves you with only the extras to order.

Message us before checkout, especially on a larger expansion, so we can double-check compatibility and spacing. If anything is unclear while you are working through the Builder, just ask!

Yes. Save 5% at checkout when you order through the KittaParts Builder.

Yes. KittaParts carries our limited lifetime warranty on workshop-made furniture. For offices, retail, and studios, Message us with traffic levels, fixings, and layout so we can confirm the right specification.

All of our products are flat-pack, designed for you to assemble at home.

Kits arrive with labelled parts and assembly instructions: PDFs (and some videos where we have them.)

KittaParts and Clip Crates are designed to go together without any special tools. If you are comfortable with flat-pack furniture, you should be fine.

For large walls, heavy units, commercial spaces, or wall-mounted sets bearing significant weight, we recommend hiring a competent installer.

See our assembly guides for what we publish online.